The frothing wand on our Expobar pulsar (4 years old) is not working. We get water from both the portafilter and the hot water dispenser, but nothing from the frothing wand. And suggestions? Anyone in the Raleigh, NC area that handles Expobar repairs?
Thank you for your submission. It is quite an easy fix. If you are able to get liquid from the hot water wand this is a good sign. Steam and hot water and drawn from the same place in the machine. Remove the tip of the steam wand. You can do this by unscrewing it. There is a small white gasket between the tip and the wand so be careful not to lose this. Get a pipe cleaner and run it up the inside of the steam wand. There is most likely a blockage and it is usually right at the end of the wand. It is caused by milk build up. Make sure that you run the steam for a few seconds after every use to make sure the wand is clean and prevent future clogging.
Please feel free to call us at 1-888-411-5282 if you have any questions or need some more help. 11-01-13 05:35PM
Answer This Question
Please Sign In
to answer this question