expobar-office-lever-semi-automatic-espresso-machine

Posts tagged expobar-office-lever-semi-automatic-espresso-machine

sort by:

Water filter replacement

Unfortunately, when I removed the water filter to replace it with a new filter, I did not pay attention to which of the 2 rubber tubings the water filter attaches.  Does it matter?

Water filter replacement

Unfortunately, when I removed the water filter to replace it with a new filter, I did not pay attention to which of the 2 rubber tubings the water filter attaches.  Does it matter?

My 5-6-year-old Expobar Office Lever just started emitting a hissing noise and steam from the top of the machine.

Noise and steam start as soon as the machine heats up and continue until the machine is turned off and has cooled down again.  It is working OK but I would like to know if there is anything I can do to stop the steam/noise, and what this problem means.  I recently moved to Manila,...

Question by Gary L.

Got my new Expobar Office Lever this week and I'm having a great time drinking excellent espressos and leaning to tame this machine....but I'm wondering how to interpret the lower gauge on my machine....It reads 8-9 bars and after using it will read 2 then move randomly to any number under 9...

Question by David F.

Any suggestions as to why the first shot pulled has the best crema, but subsequent ones tend not to? (our Office Lever is approx. 10 years old, we pull 2 doubles/day, have changed brewhead gasket twice w/no leakage around brewgroup, and let it come to temp/pressure for 30 minutes or more before...

Question by David F.

Any suggestions as to why the first shot pulled has the best crema, but subsequent ones tend not to? (our Office Lever is approx. 10 years old, we pull 2 doubles/day, have changed brewhead gasket twice w/no leakage around brewgroup, and let it come to temp/pressure for 30 minutes or more before...

Question by Angel L.

Just last week I bought a refurbished Expobar Lever from Whole Latte. Looking through your website I found some instructions for retrofitting the control board. Can you explain what that is all about? Does my machine have the old board or the new board? I know it does not have the second...

Question by chih chou c.

I have never got the 9-10 bar brew pressure indication on the brew pressure gauge,if I tamp harder in order to make it to be reached 9 bar,nothing will be pour out, is there somewhere leaking?

Question by chih chou c.

My expobar office lever got a dry boiler.Pump is working while I pull the brew lever up,but no water will be filled into the boiler.heating light goes for 1 second after the power switch on.How can I fix it ,it's not in US.

Question by David C.

I have an Office Lever Plus that is about a year old. I see that the WLL has created a copper washer with a hole in it to help with the high temperature of the group head. My question is, can I purchase one of these to put in my machine? Thanks David

Question by Rick G.

Well I pulled the trigger and got this machine. I am so excited to get it on my counter and start learning all there is to know about it. I also got the Rancilio Rocky Doserless grinder. My question is, what do you recommend I start with on the grind setting?

Question by Rick G.

Is there a way to attach a drain line for this model? I know it is possible on the plus model.

Question by Ralph N.

After initial warm up the ready light goes off then back on every couple of seconds. Is this the expected behavior or should it remain off completely? The same happens during the brew cycle.

Question by Ralph N.

How do I tell the difference between the single shot and double shot baskets?

Question by Ralph N.

My portafilter does not turn to a full 90 degrees easily, if I remove the basket it works however with the basket in place it only reaches partially to its indicated final position? Is this expected?

Expobar Office Lever Espresso Machine: What's Brewing #33

Buy it here: http://www.wholelattelove.com/Expobar/office_lever.cfm The traditional styling, compact size, and commercial strength make the the Expobar Office Lever Semi-Automatic Espresso Machine a leading competitor in the semi-automatic lever operated espresso machines. The commercial...

Question by Dean H.

What size metal tamper does the expobar office lever need? I thought I read somewhere it was a 51mm but I'm not sure.